pet1987
V.I.P.
User is Offline
Založený: 20 december 2007
Príspevky: 950
Poďakovaní : 768 v 321 príspevkoch
Reputácia :
49.9  
Hlasovalo : 19
|
 Zaslal: So marec 01, 2008 1:50 am Predmet: MSC MD Adams 2007 R2 |
 |
|
MSC MD Adams 2007 R2
When designing a mechanical system such as an automotive suspension or an aircraft landing gear, you need to understand how various components (pneumatics, hydraulics, electronics, and so on) interact as well as what forces (noise, vibration, and harshness) those components generate during operation. Adams is a motion simulation solution for analyzing the complex behavior of mechanical assemblies. Adams allows you test virtual prototypes and optimize designs for performance, safety, and comfort, without having to build and test numerous physical prototypes.
Starting with basics
Adams is a family of interactive motion simulation software. A core package (Adams/View, Adams/Solver, and Adams/PostProcessor) allows you to import geometry from most major CAD systems or to build a solid model of the mechanical system from scratch. A full library of joints and constraints is available for creating articulated mechanisms. Once the virtual prototype is complete, Adams checks the model and then runs simultaneous equations for kinematic, static, quasi-static, and dynamic simulations. Results are viewable as graph, data plots, reports, or colorful animations that you easily can share with others. You can use the results (loads created from different types of motion) of Adams simulation studies to provide loads for many different FEA programs including Nastran to optimize the structure of a design.
Tailoring Adams to your specific needs and industry
You can start with the Adams basic package and from there choose from a wide range of extension modules, including Adams/Control to analyze control systems, such as hydraulics, electronics, pneumatics, and more; Adams/Flex to examine the impact of flexible parts; Adams/Linear to calculate natural frequencies and mode shapes of large systems. Adams also offers a range of modules tailored specifically the automotive, aerospace, and rail industries. These modules include templates for building simulation design. Several CAD interface modules allow you to explore the motion of CAD designs without having to leave a familiar CAD interface or transfer data into Adams.
Download 375 MB :
[Len registrovaní užívatelia vidia celý obsah príspevku a môžu posielať príspevky na fórum. Zaregistrujte sa alebo sa prihláste na fórum.]
Registrácia je bezplatná a trvá iba niekoľko sekúnd.
[Only registrated users can see content of post. Register or sign in on the forum.]
Registration is free and takes only couple of seconds.
Download, upload, share it - rapidshare, megaupload, netload.
or
[Len registrovaní užívatelia vidia celý obsah príspevku a môžu posielať príspevky na fórum. Zaregistrujte sa alebo sa prihláste na fórum.]
Registrácia je bezplatná a trvá iba niekoľko sekúnd.
[Only registrated users can see content of post. Register or sign in on the forum.]
Registration is free and takes only couple of seconds.
Download, upload, share it - rapidshare, megaupload, netload.
---
|
|
maja_kozmo
Pozorovateľ
User is Offline
Založený: 26 marec 2008
Príspevky: 1
Poďakovaní : 0 v 0 príspevkoch
Reputácia :
0.1
|
| Zaslal: St marec 26, 2008 3:37 pm Predmet: Instalace? |
|
|
Ahoj,
nevím jak správně použít přiložené soubory "license.dat" a "lapi.dll" tak, aby program fungoval (jak použít "FLEXlm Configuration Utility" s licenčním souborem).
Děkuji za odpovědi.
|
|
pet1987
V.I.P.
User is Offline
Založený: 20 december 2007
Príspevky: 950
Poďakovaní : 768 v 321 príspevkoch
Reputácia :
49.9
Hlasovalo : 19
|
| Zaslal: St marec 26, 2008 5:48 pm Predmet: |
|
|
ak ti to pomoze, tak tu je postup instalacie k verzii 10.1
| citácia: | Adams 10.1
1) Run setup and install all options.
2) Run the licensing software and select the server options.
When prompted for a password select "prompt for password" and
click okay. A DOS window will appear which you will input the
following data.
a) Hit enter until you come to feature name. Now type "1" and hit
enter again.
b) Type in this date 31-dec-2010 and hit enter.
c) Hit enter un till the DOS window closes ( You"ll see errors ect ,but
you don't care).
d) Once the dos box is closed you be prompted by 2 pop up windows. Hit
okay for the first one reboot when prompted for the second one.
e) The reason for the above steps are only to set all the *.bat file
license and directory path.
3) Open up your control panel and then flexlm applet. Open the setup
tab and delete the Adams flexlm server.
4) Copy the license.dat to EX: C:\ADAMS 10.1\network.
5) Adams is fully licensed |
_________________
Ďakujem všetkým, ktorí mi za dobrý príspevok pridali reputáciu alebo poďakovali.
|
|
Pravidlá 
